Coating and water permeation properties of SiO2 thin films prepared by the sol-gel method on nylon-6 substrates

Nylon-6 substrates were coated with SiO₂ thin films by the sol-gel method and their water permeability coefficient was evaluated. Methyltriethoxysilane (MTES) and tetraethoxysilane (TEOS) were used as starting materials. The addition of MTES to TEOS has enabled the formation of crack-free thin films on the substrates. The thin films strongly adhered to the substrates. The water permeability coefficients of nylon-6 substrates coated with these thin films decreased with the increase in the ratio of TEOS to the total alkoxides. The pretreatment of the nylon-6 substrates with -aminopropyltriethoxysilane was found to be effective to suppress the water permeability. The water permeability was suppressed by about 40% under the optimal condition.     

Towards slow μ− production via muon catalyzed fusion

Slow ^– production via dd-CF using a two-layer arrangement is investigated. To determine its feasibility, experimental measurements are now in progress using the muonic X-ray detection method. The following experimental steps are being considered: (1) measurement of the number of ^– stopped inside a solid H₂/D₂ layer by detecting p K X-rays, (2) hot d emission detection by placing a secondary target at a distance of 10–30 mm from the layer and by detecting specific delayed X-rays, (3) measurement of the disappearance of d emission as the added D₂ layer is increased, (4) dd-CF measurement by detecting fusion protons, and (5) slow ^– emission detection. Results of the initial test experiment are presented.     

Convenient indole synthesis from 2-iodoanilines and terminal alkynes by the sequential Sonogashira reaction and the cyclization reaction promoted by tetrabutylammonium fluoride (TBAF)

The sequential Sonogashira reaction and the cyclization reaction of various 2-iodoanilines and terminal alkynes in the presence of a palladium catalyst and tetrabutylammonium fluoride (TBAF) gave the corresponding 2-substituted indoles in good yields.     

A general method for acylation of indoles at the 3-position with acyl chlorides in the presence of dialkylaluminum chloride

[reaction--see text] Indoles are selectively acylated at the 3-position in high yields on treatment with a wide variety of acyl chlorides in CH(2)Cl(2) in the presence of diethylaluminum chloride or dimethylaluminum chloride. The reaction proceeds under mild conditions and is applicable to indoles bearing various functional groups without NH protection.     

Preparation and dehydration behaviour of thomsonite with ideal chemical composition

Thomsonite with ideal chemical composition and with an ordered framework structure was synthesised hydrothermally from zeolite Na?A, which was ground to X-ray amorphous, with 0.05 mol dm^?3 CaCl₂ solution at 200°C. The dehydration behaviour of the prepared thomsonite was examined by TG-DTA. It was revealed that thomsonite lost most of zeolitic water below 450°C in three steps at about 180°, 340° and 390°C. The peak profiles of, the two higher-temperature endotherms were sharp and similar, and the weight loss at each step was approximately equal.     

Large-scale separation of metallic and semiconducting single-walled carbon nanotubes

In the applications of single-walled carbon nanotubes (SWNTs), it is extremely important to separate semiconducting and metallic SWNTs. Although several methods have been reported for the separation, only low yields have been achieved at great expense. We show a separation method involving a dispersion-centrifugation process in a tetrahydrofuran solution of amine, which makes metallic SWNTs highly concentrated to 87% in a simple way.     

Generation of functionalized asymmetric benzynes with TMP-zincates. Effects of ligands on selectivity and reactivity of zincates

We have developed new methods for preparing functionalized benzynes through deprotonative zincation as a key reaction using R2Zn(TMP)Li, and we also describes dramatic ligand effects on the benzyne formation. Deprotonative zincation of various meta-substituted bromobenzenes with Me2Zn(TMP)Li proved effective for the one-pot generation of various 3-functionalized benzynes, particularly those electrophilic substituents such as ester, amide, and cyano. On the other hand, zincation with tBu2Zn(TMP)Li, followed by electrophilic trapping (with I2) proved a powerful tool for the preparation of 1,2,3-trisubstituted aromatic compounds.8 The resultant 1,2,3-trisubstituted benzenes are available as precursors for generation of 3-substituted benzynes by halogen-zinc exchange reactions with Me3ZnLi. These methods offer far greater generality than previous methods for the synthesis of functionalized asymmetric benzynes, and should be of value in new syntheses of various natural products and functional materials. In addition, these results underline the utility of spectator ligands on the central metal of ate complexes as a tunable functionality in the development of new ate complex-promoted reactions.     

Effect of enzyme concentration on the dynamic behavior of a membrane-bound enzyme system

The dynamic behavior of the reaction-diffusion system, composed of glucose oxidase (EC 1.1.3.4) immobilized at a uniform concentration in a membrane, used as a glucose electrode is represented by a diffusion equation with a nonlinear reaction-term in one-dimensional space. The mathematical model is analyzed by computer simulation, that is, numerical integration of the equation under various initial and boundary conditions, to examine the effect of enzyme concentration on the response characteristics (responsiveness and linearity in response) of the electrode. The analysis of the responses of the system to stepwise changes in the boundary value (glucose concentration in simple solution) infers that the enzyme concentration governs the patterns of the spatial distributions of the substrates (glucose and dissolved oxygen) in steady states and transient responses. It is also revealed that the response characteristics of the electrode are optimized with concentration of immobilized enzyme and that the system establishes the steady states at the same spatial distributions of the substrates, regardless of the boundary value. The diffusion of the substrates and the oxygen concentration also have significant effects on the response characteristics of the electrode.     

Production of poly(methyl methacrylate) particles by dispersion polymerization with mercaptopropyl terminated poly(dimethylsiloxane) stabilizer in supercritical carbon dioxide

Poly(methyl methacrylate) (PMMA) particles were produced by dispersion polymerization of methyl methacrylate in the presence of mercaptopropyl terminated poly(dimethylsiloxane) (MP-PDMS) in supercritical carbon dioxide at about 30 MPa for 24 h at 65 °C. The particle diameter could be controlled in a size range of submicron to micron by varying MP-PDMS concentration. The MP-PDMS worked as not only a chain transfer agent but also a colloidal stabilizer, which was named tran stab.Part CCLI of the series Studies on suspension and emulsion